Surface Mount drip trays sit on top of any counter-top or suitable surface that would be difficult or unnecessary for the liquid to be drained out.
Surface mount drip trays are the easiest to install. Only one hole is required through the counter-top for the drain line. The drip tray is secured with a nut and washer attached to the drain pipe.
The Cut-out series is named for its design of following the flange of the our Draft Beer Draft Arm Tower. The advantage of this style is better drip coverage for the faucets. Only one hole is required through the counter-top for the drain line. The drip tray is secured with a nut and washer attached to the drain pipe.
Recessed trays provide a clutter free presentation for the bar top. The disadvantage is in installing, a large rectangle needs to be cut into the counter top. The tray is secured to the counter with silicon sealant.
The Bevel Edge drip tray ads flare to your already awesome bar. The edges of the tray are slanted creating a designers look by the draft beer tower.
Wall mount drip trays are an excellent choice for outside of a walk-in cooler. Shanks with faucets are mounted through the drip tray directly into the walk-in. We offer a variety of pre-punched shank holes for an easy installation.
Built-in glass rinser to Surface Mounts, Recessed trays, cut out trays, and wall mounts. Condition the glass before pouring your beer by inverting the glass and pushing down for water sprayer to rinse the inside of the glass with cooler water.
Utilizing a shadow box to transfer cold air around the shanks instead of the beer heating up in an uninsulated wall space. A shadow box creates an extruded pocket in the walk-in wall containing the beer connections. Using a shadow box to transfer cold air around the shanks instead of the beer warming up in uninsulated wall space is a choice you will not regret.
The Wrap Around mounts under the tower and cantilevers over the bar edge. A threaded drain is included.
Take a look at our popular trays that you can buy in the preceding pages! Remember that if you don’t see what you are looking for we will build it! Just give us a call at 951-943-1495 or send an email to jeff@acumetalfab.com we have probably have built your drip tray that you envision.