Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
Flush Mount 8" X 36" X ¾" Drip Tray with Double Drains | Recessed | S/S # 4
$ 388.02
36" Stainless Steel Flush Mount Drain Tray, w/ Double Drains
*Please allow 3 weeks for this product to ship*
The Flush Mount with Double Drains (FM-DD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FM-DD has Drains for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Double Drains
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8" X 48" X ¾" Drip Tray with Double Drains | Recessed | S/S # 4
$ 452.72
48" Stainless Steel Flush Mount Drain Tray, w/ Double Drains
*Please allow 3 weeks for this product to ship*
The Flush Mount with Double Drains (FM-DD) style drip trays is designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FM-DD has Drains for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Double Drains
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Center Drain and Offset Rinser Hole 8" X 24" X ¾" Drip Tray | Recessed | S/S # 4
$ 297.60
24" Stainless Steel Flush Mount Drain Tray w/ Center Drain and Offset Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Center Drain and Offset Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Center Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Offset Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Center Drain and Offset Rinser Hole 8" X 30" X ¾" Drip Tray | Recessed | S/S # 4
$ 340.53
30" Stainless Steel Flush Mount Drain Tray w/ Center Drain and Offset Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Center Drain and Offset Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Center Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Offset Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
8" X 45" Surface Mount Drip Tray with Drain and Rinser Hole | S/S#4
$ 369.07
8" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain and Rinser Hole
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 45" x 8"
Stainless Steel Surface Mount Drip Tray with Drain and Rinser Hole
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole.
Rinsers sold separately
Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)
8" X 16" Surface Mount Drip Tray with Drain | S/S#4
$ 201.36
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 1-2 days for Stainless Steel Brushed to ship*
Surface Mount Drip Tray, 16" x 8"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
10" X 24" Surface Mount Drip Tray with Drain | S/S#4
$ 284.66
10" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 1-2 days for Stainless Steel Brushed trays to ship*
Surface Mount Drip Tray, 24" x 10"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
7" X 48" Surface Mount Drip Tray with Drain | S/S#4
$ 315.04
7" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
3" X 14" Tall | 3 Faucet Draft Beer Tower Column Tower | S/S # 4
$ 131.01
3" Column - 3 Faucet - Stainless Steel Draft Beer Tower
*Please allow up to 1 - 2 days for this product to ship*
This Draft Beer Tower (Draft Arm) is a 3" X 14" Tower in Stainless Steel #4 Brushed Finish. Our Draft Arms come with Rubatex insulation and a Neoprene gasket to aid in keeping the product cold. The removable cap makes it easy to assemble. The flanges are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. This draft beer tower is for 3 faucets of beer
Our Draft Arms WILL NOT catch dirt in our flange!
Stainless Steel # 4 Brushed Finish.
Draft beer towers are a perfect solution for your home bar.
Made in the USA!
Rubatex insulation and a Neoprene gasket to aid in keeping the product cold.
Draft Beer Column Tower Drawing (Spec Sheet)
Replacement Spring for Glass Rinser
$ 5.00
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
Spring Replacement Part for Glass Rinser.
* PLEASE ALLOW 1-2 DAYS TO SHIP *
Rinser Assembly Spec Sheet
Draft Beer T-Tower | 4" Single Pedestal | 24" Box 8 Hole Face Plate | S/S # 4
$ 494.87
"T" Draft Beer Tower - 8 Faucets - Stainless Steel
*Please allow up to 3 - 4 days for this product to ship*
T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #4 brushed finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 3" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959.
Face Plate is Removable for Quick Installation of Beer Lines
Made In the USA
Flanges on the pedestals are welded to the tubing = NO Dirt Catching =)
4 countersunk holes for mounting.
Stainless Steel in #4 brushed finish
T-Tower Drawing (Spec Sheet)
Draft Beer T- Tower| 3" Double Pedestal | 24" Box 6 Hole Face Plate | S/S #4
$ 568.01
Double Pedestal Draft Beer Tower - 6 Faucets - Stainless Steel
*Please allow up to 1 - 2 days for this product to ship*
T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #4 brushed finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 3" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959.
Face Plate is Removable for Quick Installation of Beer Lines
Made In the USA
Flanges on the pedestals are welded to the tubing = NO Dirt Catching =)
4 countersunk holes for mounting.
Stainless Steel in #4 brushed finish
T-Tower Drawing (Spec Sheet)
15" Stainless Steel Barrel Head Drip Tray with Drain
$ 228.94
15" Stainless Steel Barrel Head Tray with Back Splash
*Please allow up to 2 weeks for this product to ship*
The Barrel Head style wall mounts are designed to mount to any suitable vertical surface directly below a barrel head type dispensing unit. Wall Mounts are made of 18 ga. Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to either a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
Barrel Head Beer Drip Tray Drawing (Spec Sheet)
6" X 24" Surface Mount Drip Tray with Drain | S/S#8
$ 256.15
6" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for Mirror Finish trays to ship*
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
