Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
7" X 36" Surface Mount Drip Tray with Drain | S/S#4
$ 271.72
7" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
8" X 45" Surface Mount Drip Tray with Drain | S/S#4
$ 344.92
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 1-2 days for trays to ship*
Surface Mount Drip Tray, 45" x 8"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
4" Draft Beer Tower Column Tower | 2 Faucet Beer Tower | S/S # 4
$ 208.15
4" Column Draft Beer Tower - Stainless Steel - 2 Faucet draft beer tower.
*Please allow up to 1 - 2 days for this product to ship*
This 4" Draft Beer Tower is a 4" X 13.5" tower in Stainless Steel #4 Brushed Finish. Our Draft Arms come with Rubatex insulation and a Neoprene gasket to aid in keeping the product cold. The removable cap makes it easy to assemble. The flanges are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. This draft beer column tower is a two faucet tower for two taps of beer.
Our Draft Arms WILL NOT catch dirt in our flange!
Rubatex insulation and a Neoprene gasket to aid in keeping the product cold.
Stainless Steel # 4 Brushed Finish.
Draft beer towers are a perfect solution for your home bar.
Made in the USA!
Draft Beer Column Tower Drawing (Spec Sheet)
Polished Stainless Steel 4" Draft Beer Tower Column Tower | 3 Faucet Beer Tower
$ 274.04
4" Column Draft Beer Tower - Polished Stainless Steel - 3 Faucet draft beer tower.
*Please allow up to 4-5 days for this product to ship*
Our 4-inch polished stainless steel draft beer tower is a 4" X 13.5" Tower in Stainless Steel #8 Mirror Polished Finish. Our Draft Arms come with Rubatex insulation and a Neoprene gasket to aid in keeping the product cold. The removable cap makes it easy to assemble. The flanges are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. This tap tower is used to dispense the three taps of draft beer.
Our Draft Arms WILL NOT catch dirt in our flange!
Rubatex insulation and a Neoprene gasket to aid in keeping the product cold.
Stainless Steel # 8 Mirror Finish
Draft beer towers are a perfect solution for your home bar.
Made in the USA!
Draft Beer Column Tower Drawing (Spec Sheet)
Flush Mount w/ Right Drain and Rinser Hole 8" X 24" X ¾" Drip Tray | Recessed | S/S # 4
$ 297.60
24" Stainless Steel Flush Mount Drain Tray w/ Right Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Right Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Right Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Polaris RZR Belt Changing Secondary Tool
$ 35.41
This Polaris RZR belt changing tool was made for anyone to change a belt for a Polaris RZR. Our laser cut tool is one piece. The tool head as been extended to make rotating the tool less for more.The handle is longer than the stock tool, thus making it easier for leverage and for your hand to be further away from the heat!100% Made In The USA, like the rest of our products. Fits all Polaris RZR's! However, it will not fit Polaris RZR Turbo that doesn't have exposed rollers
Recessed Medicine Cabinet in Stainless Steel | 14" x 24"
$ 515.77
Stainless Steel Niche Medicine Cabinet
*Please allow up to 4 weeks for this product to ship*
This beautiful stainless steel medicine cabinet replaces your standard plastic medicine with a high end stainless steel recessed niche medicine cabinet. The stainless steel is made out of 18 gauge stainless. The Niche cabinet will be seated in place with any standard caulking.
100% Quality Stainless Steel
2 fixed internal shelving provides ample storage space
Made in the USA!
*SOLD OUT, MINIMUM QTY 12 TO PURCHASE* Stainless Steel Beverage Dispenser (Thermos) | 3 Gallon
$ 219.00
$ 482.32
3 Gallon Stainless Steel Thermos for Coffee or Liquid
*Please allow up to 1-2 DAYS for this product to ship*
Our 3 gallon Java Jug comes equipped with Model SPB Tomlinson Faucets. Each insulated cover has a quick lock and open feature with an air-tight easy-open vent screw. As required by the Health Dept., each Java Jug comes equipped with a gum rubber gasket. They are constructed out of 20 gauge and 22 gauge Stainless Steel and features an 1/8" x 1" Stainless Steel band around the bottom to prevent denting. Each Java Jug is fully insulated with Styrofoam. There is 5" of clearance under the faucet for "on the counter serving". All seams are electrically welded for sanitation. Each Java Jug sold has a 1-year Guarantee on parts and labor.
Made in the USA!
Can be used for Hot or Cold liquids (Make sure they are mixed properly before adding into the Java Jug).
Our Coffee Urns will hold product at Temperature for 8- 10 hours if "pre-heated" or "cooled" with ice or ice water before adding liquid.
Not made for soup or other dense liquids that can gum up in the faucet.
Each Java Jug sold has a 1-year Guarantee on parts and labor.
All seams are electrically welded for sanitation.
Airtight, easy-open vent screw
37" Stainless Steel Surface Mount Drain Tray with Drain | 5" x 37" x 3/4"
$ 148.22
5" x 37" x 3/4" - draft beer drip tray (beer drain tray)
*Please allow up to 2 weeks for this product to ship*
The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
All exposed edges are deburred smooth for safety and appearances
The louvered Screen is Removable for Cleaning Made Easy
Stainless Steel #4 Brushed Finish
Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Made in the USA!
Surface Mount Beer Tray Drawing (Spec Sheet)
Draft Beer Tower Drip Tray | Small Wrap Around Tray | SS#4
$ 229.10
Wrap Around Drip Trays
*Please allow up to 2-3 weeks for this product to ship*
Wrap Around Drip Trays provide greater counter space the are designed to mount directly under the Tower with the grid coming off the edge of the Bar.
Draft Beer Towers with a 4" Diameter Column
Welded corners, finished smooth for safety and appearance.
Fast draining, precision perforated screen.
Lift out screen makes cleaning easy
Draft Beer Tower Overhang Tray Drawing (Spec Sheet)
20" Stainless Steel Drain Tray Large Barrel Head
$ 267.12
20" Stainless Steel Barrel Head Tray with Back Splash
*Please allow up to 3 weeks for this product to ship*
The Barrel Head style wall mounts are designed to mount to any suitable vertical surface directly below a barrel head type dispensing unit. Wall Mounts are made of 18 ga. Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to either a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
Barrel Head Beer Drip Tray Drawing (Spec Sheet)
6" X 16" Surface Mount Drip Tray with Drain | S/S#8
$ 204.20
6" Wide Mirror Polished Stainless Steel Surface Mount Beer Drip Tray with Drain
*Please allow up to 2 weeks for Mirror Finish trays to ship*
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
6" X 33" Surface Mount Drip Tray with Drain | S/S#8
$ 304.37
6" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
6" X 36" Surface Mount Drip Tray with Drain | S/S#8
$ 336.14
6" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
7" X 30" Surface Mount Drip Tray with Drain | S/S#8
$ 340.82
7" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
