Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
Flush Mount w/ Right Drain and Rinser Hole 6" X 36" X ¾" Drip Tray | Recessed | Brass
$ 574.47
36" Brass Flush Mount Drain Tray w/ Right Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Right drain and rinser hole style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 gauge brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Right Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Right Drain and Rinser Hole 8" X 48" X ¾" Drip Tray | Recessed | S/S # 4
$ 424.74
48" Stainless Steel Flush Mount Drain Tray w/ Right Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Right Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Right Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Rinser Hole and Offset Drain 6" X 36" X ¾" Drip Tray | Recessed | S/S # 4
$ 661.84
36" Stainless Steel Flush Mount Drain Tray w/ Rinser Hole and Offset Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Rinser Hole and Offset Drain style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Rinser Hole and Offset Drain 8" X 24" X ¾" Drip Tray | Recessed | S/S # 4
$ 297.60
24" Stainless Steel Flush Mount Drain Tray w/ Rinser Hole and Offset Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Rinser Hole and Offset Drain style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Rinser Hole and Offset Drain 8" X 36" X ¾" Drip Tray | Recessed | S/S # 4
$ 360.06
36" Stainless Steel Flush Mount Drain Tray w/ Rinser Hole and Offset Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Rinser Hole and Offset Drain style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Metro Tee Draft Beer Tower | 4 Faucet Holes | Stainless Steel #4
$ 555.71
Metro "T" Draft Beer Tower - 4 Faucets- Stainless Steel
Metro "T" Draft Beer Tower - 18" Long
*Please allow up to 1 - 2 weeks for this product to ship*
The Metro Tee Tower has a 4" diameter base tube and 3" diameter faucet tubes. The Metro Tee Tower comes in Stainless Steel in #4 brushed finish. The Metro Tee Tower comes with a Neoprene gasket to aid in keeping product cold. Each Metro Tee Tower comes apart for ease of installation. The flange is press formed from a single piece of material and has 4 countersunk holes for mounting.
Draft Beer Tower Features:
Metro towers offer a phenomenal look!
304 stainless steel
Stainless steel won't pit or chip!
Metro "T" Tower Drawing (Spec Sheet)
Surface Mount Drip Tray with Cut Out and Drain | 8" X 24" X ¾" | 6" Flange | SS #4
$ 284.06
Surface Mount Draft Beer Drip Tray, with Cutout for a 4" Column Tower, with Drain
*Please allow 3 weeks for this product to ship*
The SMDCU (Surface Mount Drain Cut Out Drip Tray) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through and are relieved to fit around a Draft Arm base. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount with Cut-Out and Drain
Stainless Steel # 4 Brushed Finish.
Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting
Hardware Included
Made in the USA!
Surface Mount with Cut Out Beer Tray Drawing (Spec Sheet)
5" X 10" Stainless Steel Refrigerator Drip Tray
$ 51.98
5" X 10" Stainless Steel Refrigerator Drip Tray
*Please allow 1-2 days for this product to ship*
The Keyhole style wall mounts are designed to mount to any suitable vertical surface using the keyhole slots and self-tapping screws provided. This Wall Mount is made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen.
Durable 5" X 10" stainless steel drip tray with 2" tall backsplash and no drain (no hassle with hoses and bottles). The backsplash has keyhole-shaped mounting holes that allow easy removal for cleaning.
Refrigerator Drip Tray Drawing (Spec Sheet)
6" X 4" Stainless Steel Refrigerator Drip Tray
$ 41.48
6" X 4" Stainless Steel Refrigerator Drip Tray
*Please allow 1-2 days for this product to ship*
The Keyhole style wall mounts are designed to mount to any suitable vertical surface using the keyhole slots and self-tapping screws provided. This Wall Mount is made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen.
Durable 6" X 4" stainless steel drip tray with 2" tall backsplash and no drain (no hassle with hoses and bottles). The backsplash has keyhole-shaped mounting holes that allow easy removal for cleaning.
Refrigerator Drip Tray Drawing (Spec Sheet)
Replacement Stainless Steel Sprayer for Glass Rinser
$ 10.00
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
Replacement Stainless Steel Sprayer for Glass Rinser. Quantity 1 is needed per glass rinser.
* PLEASE ALLOW 1-2 DAYS TO SHIP *
Rinser Assembly Spec Sheet
Wall Mount Drip Tray with Drain | 6-3/8" X 48" X 14" X 1" | S/S # 4 | No Faucet Holes
$ 523.68
48" Stainless Steel Wall Mount Drain Tray - No Faucet Holes
*Please allow 1-2 days for this product to ship*
The wall mount with drain (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 20 ga. louvered screen Drains are 1 1/2" long, 1/2" NPT Pipe Thread. The bottom is angled for drainage.
No Faucet Holes
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearance.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Under Counter Dispense Box | 37 Inch | 12 Holes
$ 517.79
37" Under Counter Dispense Box
*Please allow 3 weeks for this product to ship*
Undercounter dispense box, 5-3/4" X 37" X 5-3/4" with 12 holes and 1 knockout hole on the bottom and the back for easy access. 1/2" Styrofoam is included on all under-counter dispense boxes.
16ga Stainless Steel #4 Finish
Made in the USA!
1/2" Styrofoam Included
Shadow Box Drip Tray Drawing (Spec Sheet)
Under Counter Dispense Box | 37 Inch | 11 Holes
$ 517.79
37" Under Counter Dispense Box
*Please allow 3 weeks for this product to ship*
Undercounter dispense box, 5-3/4" X 37" X 5-3/4" with 11 holes and 1 knockout hole on the bottom and the back for easy access. 1/2" Styrofoam is included on all under-counter dispense boxes.
16ga Stainless Steel #4 Finish
Made in the USA!
1/2" Styrofoam Included
Shadow Box Drip Tray Drawing (Spec Sheet)
Under Counter Dispense Box | 31 Inch | 10 Holes
$ 457.80
31" Under Counter Dispense Box
*Please allow 3 weeks for this product to ship*
Undercounter dispense box, 5-3/4" X 31" X 5-3/4" with 10 holes and 1 knockout hole on the bottom and the back for easy access. 1/2" Styrofoam is included on all under-counter dispense boxes.
16ga Stainless Steel #4 Finish
Made in the USA!
1/2" Styrofoam Included
Shadow Box Drip Tray Drawing (Spec Sheet)
Under Counter Dispense Box | 31 Inch | 9 Holes
$ 457.80
31" Under Counter Dispense Box
*Please allow 3 weeks for this product to ship*
Undercounter dispense box, 5-3/4" X 31" X 5-3/4" with 9 holes and 1 knockout hole on the bottom and the back for easy access. 1/2" Styrofoam is included on all under-counter dispense boxes.
16ga Stainless Steel #4 Finish
Made in the USA!
1/2" Styrofoam Included
Shadow Box Drip Tray Drawing (Spec Sheet)
