Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
9" X 45" Surface Mount Drip Tray with Drain | S/S#4
$ 382.82
9" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 45" x 9"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 45" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 291.38
45" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 45" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 353.85
45" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 ga. Stainless Steel in #8 Mirror finish.The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 45" X ¾" Drip Tray | Recessed Beer Tray | Brass
$ 501.31
45" Brass Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 45" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 365.99
45" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 45" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 447.10
45" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 ga. Stainless Steel in #8 Mirror finish.The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 45" X ¾" Drip Tray | Recessed Beer Tray | Brass
$ 650.41
45" Brass Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8" X 45" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 405.16
45" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8" X 45" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 510.50
45" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. Stainless Steel in #8 Mirror finish.The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8" X 45" X ¾" Drip Tray | Recessed Beer Tray | Brass
$ 755.76
45" Brass Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Stainless Steel Mirror Polished | 10" X 45" Surface Mount Drip Tray with Drain
$ 510.72
10" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 45" x 10"
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
Stainless Steel Mirror Polished | 9" X 45" Surface Mount Drip Tray with Drain
$ 477.98
9" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 45" x 9"
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)